Sentry CA700 Betriebsanleitung

Sentry 1250 & Sentry 1400 Formerly ST-1200 & ST-1400 Pressure Redistribution Systems Operating Instructions Tridien Medical Revisio

Page 9 of 34 POWER ON/OFF (All Sentry/ST Systems) When the power cord is first inserted in the AC socket on the back cover, the unit goes into Stan

Page 10 of 34 LOW AIR LOSS (All Sentry/ST Systems) This key activates or deactivates the LAL feature. When activated, LAL is shown on the display a

Page 11 of 34 Inflating these bolsters increases bolster height on the sides of the mattress. Integrated bolsters and raised bolsters are inflated to

Page 12 of 34 4.4 Settings and System Information (All Sentry/ST Systems) MENU Press this key to enter the MAIN MENU options screen. Once in the M

Page 13 of 34 1. Patient Setup This option is used to set the patient’s weight. The Controller automatically adjusts the pressure values for Float

Page 14 of 34 SET FLOAT Figure 7: Set Pressure Menu Figure 8: Float Pressure Ad

Page 15 of 34 Use the Up and Down Arrow keys to set the desired Fowler Boost percentage increase. When done, press the Enter/Menu key to save and ret

Page 16 of 34 Figure 14C IMPORTANT! The CPR pull is designed to attach to the controller with a specific orientation. Make sure you align the CPR pu

Page 17 of 34 5. Obtain a new hose of the same length and apply appropriate color code label to one end of the hose (See Figure 15A). Labels and hos

Page 18 of 34 9. Repeat steps 2-8 if multiple hoses need replacement. 10. Re-apply tubing wrap. 5.0 MAINTENANCE AND CLEANING IMPORTANT! Al

Page 1 of 34 Medical Electrical Equipment needs special precautions regarding Electromagnetic Compatibility (EMC) and needs to be installed and put

Page 19 of 34 5.1.2 The exterior of the controller and CPR assembly should be periodically wiped down with a cloth dampened with disinfectant. CAUT

Page 20 of 34 an intermediate level disinfectant, such as ProTech1. Bleach and disinfectant should be used according to the manufacturer’s instructi

Page 21 of 34 The air cell assembly does not routinely need to be cleaned or disinfected between patients. If cleaning/disinfection is required, fo

Page 22 of 34 6.0 TROUBLESHOOTING GUIDE 6.1 Pressure Relief System Problem Cause Solution 1. Alarm is on The air cell alarm is activated any t

Page 23 of 34 6.0 TROUBLESHOOTING GUIDE (CONTINUED) 6.1 Pressure Relief System Problem Cause Solution 4. Air is not constantly flowing into th

Page 24 of 34 7.0 PRODUCT SPECIFICATIONS 7.1 Electronic Controller Electrical Specifications: Input Voltage AC 115V Input Frequency 60 Hz Curr

Page 25 of 34 7.2 Support Surface Specifications (Continued): Height (Inches) 6.5 Length (Inches) 80 Width (Inches): 36 (39 and 42 also available)

Page 26 of 34 7.5 Product Compliance Declarations 7.5.1 Guidance and Manufacturer’s Declaration – Electromagnetic Emissions Guidance and Manufactu

Page 27 of 34 7.5.2 Guidance and Manufacturer’s Declaration – Electromagnetic Immunity Guidance and Manufacturer’s Declaration – Electromagnetic Immu

Page 28 of 34 7.5.3 Guidance and Manufacturer’s Declaration – Electromagnetic Immunity - Non Life Supporting Guidance and Manufacturer’s Declara

Page 2 of 34 TABLE OF CONTENTS Page 1.0 Safety Precautions 3 2.0 Product Overview 5 3.0 Installation

Page 29 of 34 7.5.4 Recommended Separation Distances Recommended Separation Distances Between Portable And Mobile RF Communications Equipment An

Page 30 of 34 8.0 WARRANTY INFORMATION LIMITED WARRANTY Tridien Medical (“Tridien”) warrants each of its products to perform in accordance with esta

Page 31 of 34 9.0 PRODUCT RETURN The Sentry/ST Systems have been designed to provide you with years of trouble-free service. However, in the event

Page 32 of 34 Notes

Page 33 of 34 Notes

Page 34 of 34 Notes

Tridien Medical 4200 NW 120th Avenue Coral Springs, FL 33065 Phone: 954-340-0500 FAX: 954-340-0511 Web Site: trid

Page 3 of 34 1.0 SAFETY PRECAUTIONS CAUTION! The Sentry 1250/ST 1200 & Sentry/ST-1400 Systems (“Sentry/ST Systems”) are contraindicated for use

Page 4 of 34 CAUTION! PE GND terminal in the appliance is only for functional earth. The unit is a Class II device with functional earth and used on

Page 5 of 34 2.0 PRODUCT OVERVIEW The Sentry/ST Systems are microcontroller-based therapeutic Pressure Redistribution Mattress Systems for patient

Page 6 of 34 3.0 INSTALLATION NOTE - It is recommended that all shipping and packing material be saved in the event that the product has

Page 7 of 34 3.2.2 Electronic Controller: 1. Hang the controller on the TOP edge of the footboard on the bed frame. 2. Attach the hose/CPR asse

Page 8 of 34 4.0 OPERATION 4.1 Control Panel The Sentry/ST-1400 control panel is shown in the diagram below. The control panels for the Sentry 1